Multipositionsventile HIGH PRESSURE

Dead-end flowpath - SD configuration

SD valves select one of 4 to 16 dead-ended streams. The selected stream flows from the valve outlet to a sample valve, pressure sensor, detector, column, etc. This configuration may also be used to direct one stream to a number of outlets for applications such as fraction collection.
  1/16" fittings, 0.4 mm ports (.016")   UW Type Standard electric actuators: 110 VAC
(230 VAC optional. Consult factory for further details.) Non-CE, restricted use within the EU. Microelectric actuators: 24 VDC (includes a 110/230 VAC to 24 VDC power supply)
5000 psi gas; 75°C max
Nitronic 60 valve body Valcon E rotor Materials: HastelloyC, Inconel 600, Monel 400, Nickel 200, Nitronic 50,Titanium, Zirconium

  4 Position 6 Position 10 Position
  Artikelnummer   Artikelnummer   Artikelnummer  
Manual (not recommendet) CSD4UW   CSD6UW   CSD10UW  
With air actuator         ACSD10UW  
With standard electric actuator ECSD4UW   ECSD6UW   ECSD10UW  
With microelectric actuator EMTCSD4UW   EMTCSD6UW   EMTCSD10UW  
Replacement valve DCSD4UW   DCSD6UW   DCSD10UW  
Replacement rotor SSACSD4UW   SSACSD6UW   SSACSD10UW  
1/8" fittings, 0.75 mm ports (.030")   UW Type
Standard electric actuators: 110 VAC
(230 VAC optional. Consult factory for further details.) Non-CE, restricted use within the EU. 5000 psi gas   Microelectric actuators: 24 VDC (includes a 110/230 VAC to 24 VDC power supply)
5000 psi gas; 75°C max
Nitronic 60 valve body Valcon E rotor Materials: HastelloyC, Inconel 600, Monel 400, Nickel 200, Nitronic 50,Titanium, Zirconium

  4 Position 6 Position 8 Position
  Artikelnummer   Artikelnummer   Artikelnummer  
Manual (not recommendet) SD4UW   SD6UW   SD8UW  
With air actuator         ASD8UW  
With standard electric actuator ESD4UW   ESD6UW   ESD8UW  
With microelectric actuator EMTSD4UW   EMTSD6UW   EMTSD8UW  
Replacement valve DSD4UW   DSD6UW   DSD8UW  
Replacement rotor SSASD4UW   SSASD6UW   SSASD8UW  
Both column ends selected - STconfiguration
ST valves are used for multi-column, multi-sample, or multi-trap operations. This valve can be used between an injector and detector to permit manual or automated HPLC column selection.
  1/16" fittings, 0.4 mm ports (.016")     UW Type
Standard electric actuators: 110 VAC, (230 VAC optional. Consult factory for further details.) Non-CE, restricted use within the EU. Microelectric actuators: 24 VDC (includes a 110/230 VAC to 24 VDC power supply). Manual versions are not available.
5000 psi gas; 75°C max
Nitronic 60 valve body Valcon E rotor Materials: HastelloyC, Inconel 600, Monel 400, Nickel 200, Nitronic 50,Titanium, Zirconium

  4 Position 6 Position
  Artikelnummer   Artikelnummer  
With air actuator ACST4UW   ACST6UW  
With standard electric actuator ECST4UW   ECST6UW  
With microelectric actuator EMTCST4UW   EMTCST6UW  
Replacement valve DCST4UW   DCST6UW  
Replacement rotor SSACST4UW   SSACST6UW  
1/16" Stainless steel loops   for UW Type valves
Each stainless steel loop includes two stainless nuts and two stainless ferrules. Order special fittings separately. When a set of loops is ordered, loops will be supplied from the same lot.
Volume Artikelnummer Volume Artikelnummer
10 µl SL10CSTUW 500 µl SL500CSTUW
15 µl SL15CSTUW 1 ml SL1KCSTUW
20 µl SL20CSTUW 2 ml SL2KCSTUW
25 µl SL25CSTUW 5 ml SL5KCSTUW
50 µl SL50CSTUW 10 ml SL10KCSTUW
100 µl SL100CSTUW    
250 µl SL250CSTUW