Typ | Tygon® ST | PharMed® Ismapren | Tygon® MHLL |
General Description |
The
inexpensive all round tubing for general laboratory applications, and for foodstuffs |
The ideal
tubing for pharmaceutical and medical applications, and for foodstuffs |
Chemically
resistant and long life tubing |
Advantages | • Transparent • Resistant to almost all inorganic chemicals • Tasteless • Appropriate for foodstuffs • Does not age • High dielectric constant • Low gas permeability • Smooth inner surface |
• Ideal
for cell and tissue cultures • Very long service life • Non-toxic and non-hemolytic • Impermeable to normal light and UV- radiation • Low gas permeability . Appropriate for medical products and foodstuffs |
• Plasticizer-free • Smooth innerbore • Low sorption maintains fluid integrity • Minimal adhesion and diffusion • Suitable for methyl ethyl ketone (MEK), acetone and other corrosive solvents • Long life tubing |
Limitations | • Service
life is about 4 times shorter
than Tygon LFL • Potential leaching of plasticizers |
• Potential leaching of additives (lubricants | • Cannot
be repeatedly sterilized |
Physical properties |
Thermoplastic PVC-based material with plasticizer • Flexible, firm , transparent |
Thermoplastic Elastomer based on polypropylene • Firm, opaque, beige color |
Special
thermoplastic of high purity • Without additives • Without plasticizer • Environmental-friendly disposal • Flexible, firm, opaque |
Service temperature range | -50°C to +74°C | -60°C to +135°C | -70°C to +74°C |
Chemical Resistance1 |
|||
Acids (H2SO4) 10% | 10 | 10 | 10 |
Acids (H2SO4) 30% | 10 | 10 | 10 |
Acids (H2SO4) 95 - 98 % | 1 | 1 | 10 |
Bases (NaOH) 10-15% | 10 | 10 | 10 |
Bases (NaOH) 30-40% | 4 | 10 | 10 |
Hydrocarbons (aliphatic) | 1 | 1 | 1 |
Mineral Salts | 10 | 10 | 10 |
Alcohols | 1 | 10 | 10 |
Ketones (Acetone) | 1 | 1 | 7 |
Applications pressure vacuum viscous media sterile media |
. fair good excellent limited |
. not recommended pressure excellent good excellent |
. not recommended pressure good good good |
Standards Compliance |
FDA 21 CFR 175.300 | • USP
Class VI • FDA 21 CFR, 177.2600 • NSF listed (Standard 51) |
• USP
Class VI • FDA 21 CFR, Part 177.2600 |
Sterilization | Steam
autoclaveable
and sterilizable with
Ethylene oxide. Coil loosely in non-linting cloth or paper; autoclave at 121°C (250°F) 1 kg/cm2 (15 psi) for 30 min. (tubing will appear milky); air dry at max. 66°C (150°F) for 2 to 21 /2 hours until clear |
Autoclaveable
without
any effects on the
service life Caution: Use special tubing version (welded stoppers) when autoclaving 2 or 3-stop color-coded tubing |
Autoclaveable
for 30
min. at 1 bar (15 psi),
121 °C (250°F) Radiation: Irradiate at up to 25 MRad Gas: Ethylene oxide Caution: cannot be repeatedly sterilized |
Gas
permeability2 C02 O2 N2 |
. 360 80 40 |
. 1200 200 80 |
. ca. 4900 ca. 1000 ca. 350 |
Odor and Taste | none | low | n.a. |
Toxicity | non toxic | non toxic | n.a. |
Tubing life3 at 0 bar at 0.7 bar |
. 35 hrs. at 0 bar 30 hrsat 0.7 bar |
. 1000 + hrs. 1000 hrs. |
. 800 + hrs. n.a. |
1. Rating 1 not recommended; 10 excellent | |||
2
Gas permeability = volume of gas (cc) x wall thickness (mm) ..................................................... area of tubing i.d. (cm2) x time (sec) x pressure drop across tubing wall (cmHg) x 10-10 |
|||
3.
Tubing 6,4mm ID, 1.6mm wall, 3-roller pumphead, 600 rpm, 23°C service
life ending with rupture (ISMATEC tubing pumps run about 11 rpm - 500 rpm). |
2-STOP TUBING FOR CA Cassettes | |||||||||||||||
Tygon® ST R3603/R-3607 | PharMed® Ismaprene |
Tygon
MHLL (for aggressive media) |
Tubing ID (mm) | Color Code | Pump | Low Flow | |||||||||
Std. Speed (IPC) | Low Speed (IPC-N) | ||||||||||||||
Channels | 4, 8, 12 or 24 | 4, 8, 12 or 24 | |||||||||||||
Rollers | 8 | 8 | |||||||||||||
Artikel- nummer | Menge1 | Artikel- nummer | Menge1 | Artikel- nummer | Menge2 | Speed (rpm) | 0,45 | 45,0 | 0,11 | 11,25 | |||||
mL/min5 per channel | Min. | Max. | Min. | Max | |||||||||||
SC0188 | 12-Pckg | 0.133 | Orange-Black | 0.002 | 0.15 | 0.0004 | 0.039 | ||||||||
SC0001 | 12-Pckg | 0.193 | Orange-Red | 0.003 | 0.26 | 0.0007 | 0.066 | ||||||||
SC0002 | 12-Pckg | SC0320 | 6-Pckg | 0.253 | Orange-Blue | 0.005 | 0.41 | 0.001 | 0.10 | ||||||
SC0005 | 12-Pckg | SC0322 | 6-Pckg | 0.513 | Orange-Yellow | 0.015 | 1.5 | 0.004 | 0.38 | ||||||
SC0008 | 12-Pckg | SC0324 | 6-Pckg | SC0717 | 6-Pckg | 0.764 | Black-Black | 0.032 | 3.2 | 0.009 | 0.81 | ||||
SC0011 | 12-Pckg | SC0326 | 6-Pckg | 1.024 | White-White | 0.057 | 5.7 | 0.014 | 1.4 | ||||||
SC0014 | 12-Pckg | 1.224 | Red-Grey | 0.079 | 7.9 | 0.0020 | 2.0 | ||||||||
SC0017 | 12-Pckg | SC0330 | 6-Pckg | SC0719 | 6-Pckg | 1.524 | Yellow-Blue | 0.12 | 12 | 0.030 | 3.0 | ||||
SC0020 | 12-Pckg | SC0332 | 6-Pckg | 1.854 | Green-Green | 0.17 | 17 | 0.043 | 4.3 | ||||||
SC0023 | 12-Pckg | SC0335 | 6-Pckg | 2.544 | Purple-Orange | 0.30 | 30 | 0.075 | 7.5 | ||||||
SC0024 | 12-Pckg | SC0336 | 6-Pckg | SC0721 | 6-Pckg | 2.794 | Purple-White | 0.35 | 35 | 0.088 | 8.8 | ||||
SC0222 | 12-Pckg | 3.174 | Black-White | 0.44 | 44 | 0.11 | 11 |
3-STOP TUBING FOR MS/CA Cassettes for Reglo Digital and Analog | |||||||||||||||
Tygon® ST R3603/R-3607 | PharMed® Ismaprene |
Tygon
MHLL (for aggressive media) |
Tubing ID (mm) | Color Code | Pump | Reglo Digital and Analog | |||||||||
Channels | 2 | 4 | |||||||||||||
Rollers | 8 | 8 | |||||||||||||
Artikelnummer | Menge1 | Artikel- nummer | Menge6 | Artikel- nummer | Menge7 | Speed (rpm) | 1.6 | 160 | 1.0 | 100 | |||||
mL/min5 per channel | Min. | Max. | Min. | Max | |||||||||||
SC0189 | 12-Pckg | 0.133 | Orange-Black | 0.002 | 0.17 | 0.002 | 0.11 | ||||||||
SC0049 | 12-Pckg | 0.193 | Orange-Red | 0.004 | 0.37 | 0.003 | 0.23 | ||||||||
SC0050 | 12-Pckg | SC0303 | 6-Pckg | 0.253 | Orange-Blue | 0.007 | 0.65 | 0.005 | 0.41 | ||||||
SC0053 | 12-Pckg | SC0305 | 6-Pckg | 0.513 | Orange-Yellow | 0.027 | 2.7 | 0.017 | 1.7 | ||||||
SC0056 | 12-Pckg | SC0307 | 6-Pckg | SC0711 | 6-Pckg | 0.764 | Black-Black | 0.058 | 5.8 | 0.036 | 3.6 | ||||
SC0059 | 12-Pckg | SC0309 | 6-Pckg | 1.024 | White-White | 0.10 | 10 | 0.063 | 6.3 | ||||||
SC0062 | 12-Pckg | 1.224 | Red-Grey | 0.14 | 14 | 0.088 | 8.8 | ||||||||
SC0065 | 12-Pckg | SC0313 | 6-Pckg | SC0713 | 6-Pckg | 1.524 | Yellow-Blue | 0.20 | 20 | 0.13 | 13 | ||||
SC0068 | 12-Pckg | SC0315 | 6-Pckg | 1.854 | Green-Green | 0.28 | 28 | 0.17 | 17 | ||||||
SC0071 | 12-Pckg | SC0318 | 6-Pckg | 2.544 | Purple-Orange | 0.44 | 44 | 0.27 | 27 | ||||||
SC0072 | 12-Pckg | SC0319 | 6-Pckg | SC0715 | 6-Pckg | 2.794 | Purple-White | 0.50 | 50 | 0.31 | 31 | ||||
SC0224 | 12-Pckg | 3.174 | Black-White | 0.57 | 57 | 0.35 | 35 |
3-STOP TUBING FOR MS/CA Cassettes for Fixed Speed, Rack-Mount | |||||||||||||||
Tygon® ST R3603/R-3607 | PharMed® Ismaprene |
Tygon
MHLL (for aggressive media) |
Tubing ID (mm) | Color Code | Pump | Reglo Digital and Analog | |||||||||
Channels | 2 | 4 | |||||||||||||
Rollers | 8 | 8 | |||||||||||||
Artikelnummer | Menge1 | Artikel- nummer | Menge6 | Artikel- nummer | Menge7 | Speed (rpm) | 20 | 60 | 20 | 60 | |||||
mL/min5 per channel | Fixed Speed | ||||||||||||||
SC0189 | 12-Pckg | 0.133 | Orange-Black | 0.021 | 0.064 | 0.021 | 0.043 | ||||||||
SC0049 | 12-Pckg | 0.193 | Orange-Red | ||||||||||||
SC0050 | 12-Pckg | SC0303 | 6-Pckg | 0.253 | Orange-Blue | 0.08 | 0.24 | 0.08 | 0.16 | ||||||
SC0053 | 12-Pckg | SC0305 | 6-Pckg | 0.513 | Orange-Yellow | 0.34 | 1.0 | 0.34 | 0,67 | ||||||
SC0056 | 12-Pckg | SC0307 | 6-Pckg | SC0711 | 6-Pckg | 0.764 | Black-Black | 0.73 | 2.2 | 0.73 | 1.5 | ||||
SC0059 | 12-Pckg | SC0309 | 6-Pckg | 1.024 | White-White | 1.3 | 3.8 | 1.3 | 2.5 | ||||||
SC0062 | 12-Pckg | 1.224 | Red-Grey | 1.8 | 5.3 | 1.8 | 3.5 | ||||||||
SC0065 | 12-Pckg | SC0313 | 6-Pckg | SC0713 | 6-Pckg | 1.524 | Yellow-Blue | 2.6 | 7.7 | 2.6 | 5.1 | ||||
SC0068 | 12-Pckg | SC0315 | 6-Pckg | 1.854 | Green-Green | 3.5 | 10 | 3.5 | 7.0 | ||||||
SC0071 | 12-Pckg | SC0318 | 6-Pckg | 2.544 | Purple-Orange | 5.5 | 16 | 5.5 | 11 | ||||||
SC0072 | 12-Pckg | SC0319 | 6-Pckg | SC0715 | 6-Pckg | 2.794 | Purple-White | ||||||||
SC0224 | 12-Pckg | 3.174 | Black-White | 7.1 | 21 | 7.1 | 14 |
1) Each piece of tubing in the pack is 400 mm in length. |
2) Each piece of tubing in the pack is 381 mm in length. |
3) Tubing wall thickness is 0.91 mm. |
4) Tubing wall thickness is 0.86 mm, except Tygon MHLL tubing, which are 0.91 mm. |
5) Approximate values, determined with Tygon tubing and water at 22°C, with no differential pressure. |
6) Each piece of tubing in the pack is 300 mm in length. |
EXTENSION TUBING FOR 2- AND 3-STOP TUBING | ||||||
Tygon® ST R3603/R-3607 | PharMed® Ismaprene |
Tubing ID (mm) | ||||
Artikelnummer | VE in meter | Artikelnummer | VE in meter | |||
SC0226 | 10 m | 0.133 | ||||
SC0025 | 10 m | 0.193 | ||||
SC0026 | 10 m | SC0337 | 3 m | 0.253 | ||
SC0029 | 10 m | SC0339 | 3 m | 0.513 | ||
SC0032 | 10 m | SC0341 | 3 m | 0.764 | ||
SC0035 | 10 m | SC0343 | 3 m | 1.024 | ||
SC0038 | 10 m | 1.224 | ||||
SC0041 | 10 m | SC0347 | 3 m | 1.524 | ||
SC0044 | 10 m | SC0349 | 3 m | 1.854 | ||
SC0047 | 10 m | SC0352 | 3 m | 2.544 | ||
SC0048 | 10 m | SC0353 | 3 m | 2.794 | ||
SC0223 | 10 m | 3.174 |